Skerper Sink Bridge sharpening stone holder, SA002

notforsale

not_replaced_in

Skerper Basic ceramic sharpening steel, 24.5 cm, SH003

Skerper whetstone holder SA001

Skerper Flattening Stone SA004 grain 24/220

Skerper Beeswax MA001, 250 gram

Skerper Axe Sharpener 160/600, SO002

Skerper Paddle Strop STP001, stropping paddle

Skerper Dressing Stone, SA003

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Naniwa Dressing Stone, A-206, grit: 600

Skerper Basic diamond sharpening steel 30 cm, SH005

Ceramic combination sharpening stone from Japan.
Length: 21 cm
Grain size: 1000/4000
Weight: 1800 grams

The **Kai Shun DM-0400 combination sharpening stone, grain 1000/4000** is a great sharpening stone to sharpen your knives. The hard ceramics ensure quick results and don't easily wear out.


The red side with grain J1000 is great make sure your knives are sharp again With the J4000 grain, the yellow side, you can make your knife even sharper than it was when you received it. With this combination stone you immediately own all stones you need to sharpen your knives. The included rubber stone holder ensures that the stone stays in place as you use it. The J1000 is thicker because you will use this side more often. Because of the height of the stone and the holder the sharpening stone is placed on as you sharpen your knives, there is enough room to hold your knife without your hands touching the surface.


We recommend submerging the stone about 10 to 20 minutes before use. As you sharpen your knife the sharpening stone should always be covered with a thin layer of water.



Kai Shun DM-0400 combination sharpening stone, grain 1000/4000

grit_general

Kai Shun DM-0708 combination sharpening stone, grain 300/1000

colour

stone_abrasive

value_width

value_height

value_length

value_weight

grit_size_kato

brand

material

value_number

expectedRestockDate

videos

msrp_price

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

value_height_usable_part

The height/thickness of a sharpening stone (excluding a potential base).

Height usable part

value_length_useful_part

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

value_width_useful_part

Dimensions & weight

The material that gives the sharpening stone its abrasive effect. Diamond, ceramics (e.g. aluminium oxide or silicon carbide) or the materials in a natural stone. Read [more about the advantages and disadvantages of these materials](/en/ct/sharpening-stone-materials-which-are-the-best.htm).

Abrasive

Material

The grain size a supplier gives to its sharpening stones. Please note: This can be either in FEPA-F (European), ANSI (American) or JIS (Japanese). Read [more about the different grain sizes here](/en/ct/expressing-grain-sizes-sharpening-stones.htm).

Grit according to supplier

stone_acc_type

stone_guides

Sharpening guides help you maintain the right angle when sharpening your knives. [Read more about using sharpening guides here](/en/ct/use-of-sharpening-guides-on-whetstones.htm).

Delivered with sharpening guides

stone_water

Some sharpening stones need to be submerged, others only need a splash of water and some need no water at all! For the best results, check in advance what is best for your sharpening stone.

Use with water

The grain size we give to a sharpening stone. We test all sharpening stones ourselves and add an appropriate grain size on the basis of this test. From extra coarse to ultra fine.

Grit size

Features & functions

number_of_stones

sharpstone_package

sharpstoneacc_inclusive

stone_stand

A holder/base that ensures the stone doesn't move during the sharpening process.

Kai Shun DM-0400 combination sharpening stone, grain 1000/4000

Kai Shun DM-0400 combination sharpening stone, grain 1000/4000

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Kai Shun DM-0400 combination sharpening stone, grain 1000/4000

Kai Shun DM-0400 combination sharpening stone, grain 1000/4000

Kai Shun DM-0400 combination sharpening stone, grain 1000/4000

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Kai Shun DM-0400 combination sharpening stone, grain 1000/4000

Relevant topics