Name: Ontario RAT-2 D2 od green, plain edge black, 8830OD
Brand: Ontario
SKU: OKC8830OD
Price: 495 DKK
Availability: OutOfStock

Skerper paddle strop Viking, rough, stropping paddle

notforsale

not_replaced_in

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper Pocket Strop STP002, stropping paddle

Work Sharp Guided Field Sharpener, WSGFS221

Shapton Glass Stone sharpening set grit 1000, 3000 and 8000, 50508

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Work Sharp Angle Set knife sharpener, WSBCHAGS

KME Precision Knife Sharpening System, R.P.S.H. Combo Kit, KF-CBO

Nano-Oil 10w maintenance oil 8cc/8ml

Work Sharp Multi-Sharpener Ken Onion Edition

Handle/blade: FRN/D2
Blade length: 7.4 cm
Weight: 80 grams

The **Ontario RAT-2 D2** is the baby brother of the RAT-1. A nice and solid EDC pocket knife, for an even better price. This knife is a must-have for any knife enthusiast.

 We start with the blade. The blade is made from D2-steel. A hard, tough type of steel that retains its sharpness well. According to many it is a little better than the AUS8 on the 'normal' Ontario RAT. However, D2 is not 100% stainless so you need to be careful with (fruit) acids and moisture. The blade has a classic droppoint shape. A very common blade shape you can use for almost all daily tasks. Pointed enough for packages, enough belly to cut things on a base and a flat part to peel an apple. Finished with a black coating. This coating will help you prevent rust and reflections. Even though in time even a coating will wear out.

 You can easily open the pocket knife with the double thumb stud. Once opened the blade is locked by a solid linkerlock. As such the pocket knife will never close during use. The top of the blade has been enhanced with ridges for additional grip for the thumb.

 The pocket clip can be attached in four different positions. Up, down, left, right. On each side you can find mounting holes. As such you can carry the knife 'tip-up, tip-down' and left and right-handed. You can decide for yourself where you want the pocket clip.

 The handle is made from glass-reinforced nylon. Also called FRN. Light-weight and incredibly strong. It feels solid and fits nicely with the knife. The handle is smooth enough to never damage your pocket. The handle is nicely shaped and feels great in hand. The handle has also been enhanced with a lanyard eye.

 With the Ontario RAT-2 you won't get a knife that will last a lifetime. You do, however, get a solid tool for not a lot of money. And yet, the knife doesn't feel cheap. The perfect companion to take with you on a daily basis.



Ontario RAT-2 D2 od green, plain edge black, 8830OD

Ontario RAT-2 D2 desert tan, plain edge satin, 8828DT

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

Ontario RAT-2 D2 black, plain edge black, 8830

Ontario RAT-2 D2 desert tan, plain edge black, 8830DT

Ontario RAT-2 D2 carbon fibre, plain edge satin, 8832

Ontario RAT-2 D2 carbon fibre, plain edge black, 8834

Ontario RAT-2 SP plain edge, 8860

Ontario RAT-2 BP plain edge black, 8861

brand

zm_series

expectedRestockDate

legal_agecheck_key

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Ontario RAT-2 D2 od green, plain edge black, 8830OD

Ontario RAT-2 D2 od green, plain edge black, 8830OD

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Recommended combi-deals

Ontario RAT-2 D2 od green, plain edge black, 8830OD

Ontario RAT-2 D2 od green, plain edge black, 8830OD

Ontario RAT-2 D2 od green, plain edge black, 8830OD

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Recommended combi-deals

Ontario RAT-2 D2 od green, plain edge black, 8830OD

Relevant topics