The **ANV Z200** is a cool EDC pocket knife, made in the Czech Republic by Acta Non Verba Knives. ANV produces modern knives. The Z200 is no exception. It has a sleek design and is made from the latest materials, like the Swiss Super-LumiNova inlay in the nail nick. This material lights up in the dark and is often used for the dials of high-end watches. A cool detail!

This version of the Z200 has a G10 handle and a Sleipner steel blade. Sleipner is a great tool steel with excellent sharpness retention.

What makes the Z200 unique is its large nail nick. You use it to open the knife with two hands. You can tell that ANV has paid close attention to the details. The spine of the blade is nicely rounded to prevent unnecessary sharp edges. It also features an engraving of the words 'Acta Non Verba'. When opened, the blade is locked by a liner lock.

You can carry the Z200 in your pocket with the deep-carry wire pocket clip. This is located at the end of the handle and is kept in place with the help of the stand-off. You can switch the clip for left-handed use.

## Acta Non Verba Knives

Acta Non Verba, or *ANV Knives*, is based in the Czech Republic and produces excellent knives for amazing prices. The designs are carefully thought out and they always have great finishes. Especially for this price range. You can immediately recognise these knives by their sleek designs. They have flowing lines and a distinctly modern look. Slightly different from other brands, and therefore unique.

ANV Z200 Sleipner, DLC, Linerlock, G10, Olive, Z200-021 pocket knife

colour

ANV Z200 Sleipner, DLC, Linerlock, G10, Red, Z200-022 pocket knife

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

legal_agecheck_key

notforsale

not_replaced_in

expectedRestockDate

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Ich war sehr überrascht von diesem Messer (positiv!!!!), DLC-Beschichtung tatsächlich äußerst widerstandsfähig, Klinge kann einiges ab, relativ einfach nachschärfbar, ein ganz tolles "Arbeitspferd" zu einem sehr moderaten Preis wie ich finde. 

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

ANV Z200 Sleipner, DLC, Linerlock, G10, Olive, Z200-021 pocket knife