Name: Viper Sakura carving knife 14cm ziricote wood, VT7510ZI
Brand: Viper
SKU: VPVT7510ZI
Price: 837 DKK
Availability: BackOrder
Rating: 10 (1 reviews)

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Skerper Basic sharpening pen with a diamond steel, SO001

Viper Sakura paring knife 9 cm ziricote wood, VT7508ZI

legal_agecheck_key

Viper Sakura steak knives ziricote wood 2-piece, 7506-02ZI

Viper Sakura Santoku 16cm ziricote wood, VT7516ZI

Viper Sakura chef's knife 20cm ziricote wood, VT7518ZI

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Flitz knife maintenance set, 4-piece

Eden EQP001 Wooden Cutting Board

Eden Magnetic knife strip Walnut, 50 x 6 cm

Spyderco Ceramic Benchstones, medium

Spyderco- Bench Stone Fine

Spyderco- BenchStone Ultra Fine

Blade length: 14 cm
Total length: 25 cm
Weight: 130 grams

The **Viper Sakura carving knife 14 cm ziricote wood, VT7510ZI** is perfect when cutting any type of raw or cooked meat. It is not only the result of the convex edge, but also because the knife is razor-sharp.

 ## Viper Sakura kitchen knives

 The Viper Sakura kitchen knives were designed by the two famous Danish designers: [Jens Ansø](/en/ct/jens-anso-knife-designer.htm) and Jesper Voxnaes. Together they are responsible for designing, amongst others, pocket knives, bushcraft knives and kitchen knives. Many of these knives were designed in cooperation with knife manufacturers. In this case the popular Italian brand Viper. The design looks graceful and classic because of the wooden handle, the embellishments on the blade and the rivets. The shape of the knife and the steel used are, however, incredibly modern!

 ### The blade

 The full-tang blade is made from Nitro-B and has a hardness of 59 HRC. This remarkable stainless steel has been alloyed with extra nitrogen by multiple cryogenic treatments. As a result the Nitro-B steel retrieves its hardness from the nitrogen molecules and not from the carbon molecules as is the case with carbon steel. As such the blade is not only remarkably hard, it is also corrosion resistant.

 ### The handle

 The handle is made from ziricote wood. This Central American dark ziricote wood has a high density and can handle decay, making it a very stable type of wood. The wood is mounted to the steel with two stainless steel and stunningly engraved rivets. In addition, in between the blade and the wooden handle you will find a stunning embellishment which gives the classic design of the knife with an elegant and warm finish.

 ## Viper

 Viper Tecnocut has been a popular knife manufacturer working from the Italian city of Maniago for over hundred years. They are already known for their excellent hunting and gentleman's knives, but now also offer excellent kitchen knives!



Viper Sakura carving knife 14cm ziricote wood, VT7510ZI

handle_material

Viper Sakura carving knife 14 cm bocote wood, VT7510BC

colour

blade_finish

blade_feature

kitchen_steel

knife_edge_type

sharpening_type

sharpening_angle

delivered_as_a_set

kitchen_knife_type

value_number_of_knives

value_weight

value_blade_height

value_blade_length

value_overall_length

value_blade_thickness

Viper Sakura carving knife 14cm, VT7510UL

handedness

brand

series

expectedRestockDate

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Parfait. Super finition et coupe rasoir. 

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

Viper Sakura carving knife 14cm ziricote wood, VT7510ZI

Viper Sakura carving knife 14cm ziricote wood, VT7510ZI

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Viper Sakura carving knife 14cm ziricote wood, VT7510ZI

Viper Sakura carving knife 14cm ziricote wood, VT7510ZI

Viper Sakura carving knife 14cm ziricote wood, VT7510ZI

Full description

Specifications

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Viper Sakura carving knife 14cm ziricote wood, VT7510ZI

Relevant topics