Name: Viper Koi VT4010FC Carbon fibre M390 fixed knife, Jesper Voxnaes design
Brand: Viper
SKU: VPVT4010FC
Price: 1438 DKK
Availability: OutOfStock

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Knivesandtools Knife Pouch Black, by Maxpedition

Skerper Maintenance Oil Pen MA002, 10 ml

Schmuckatelli Joe Skull Bead 3/16" Hole Pewter

Work Sharp Angle Set knife sharpener, WSBCHAGS

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

KME Precision Knife Sharpening System, Diamond Stone Kit, KF-D4

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Nano-Oil 10w maintenance oil 8cc/8ml

Fallkniven Diamond Ceramic Whetstone DC4

Work Sharp Multi-Sharpener Ken Onion Edition

Spyderco Sharpmaker, 204MF

Handle/blade: carbon fibre/M390
Blade length: 8.8 cm
Weight: 115 grams

The **Viper Koi** is a versatile outdoor knife, designed by Jesper Voxnaes. For this design he combined sleek lines with the typical Italian curved contours. You use it during camping trips or hikes, but also in the outdoor kitchen or even while hunting.

The blade is short and high. A little different, but it works for the Koi. The blade is made from Böhler M390 steel. It is an extremely stainless type of steel that retains its sharpness well. At the same time M390 is also stainless. A fine combination that doesn't require a lot of maintenance.

The handle of the Viper Koi is enhanced with carbon fibre. Because of the hollow pins you can add a nice lanyard or wrist strap. You carry the Viper Koi in the included kydex sheath. It is enhanced with a nice belt clip which you can attach in many different ways to make sure you can carry it either way you like.

Viper Koi VT4010FC Carbon fibre M390 fixed knife, Jesper Voxnaes design

Viper Koi VT4009GB Black G10 N690 fixed knife, Jesper Voxnaes design

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

brand

zm_series

expectedRestockDate

legal_agecheck_key

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Viper Koi VT4010FC Carbon fibre M390 fixed knife, Jesper Voxnaes design

Viper Koi VT4010FC Carbon fibre M390 fixed knife, Jesper Voxnaes design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Viper Koi VT4010FC Carbon fibre M390 fixed knife, Jesper Voxnaes design

Viper Koi VT4010FC Carbon fibre M390 fixed knife, Jesper Voxnaes design

Viper Koi VT4010FC Carbon fibre M390 fixed knife, Jesper Voxnaes design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Viper Koi VT4010FC Carbon fibre M390 fixed knife, Jesper Voxnaes design

Relevant topics