Name: TOPS Knives Anaconda 9 Hunters Point AN9HP survival knife, Ron Hood design
Brand: TOPS Knives
SKU: TK-AN9HP
Price: 2057 DKK
Availability: InStock

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Skerper Pocket Strop STP002, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with diamond sharpening steel, SH006

Skerper paddle strop Viking, rough, stropping paddle

LifeStraw Personal water filter

Knivesandtools 550 paracord type III, colour: neon orange, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Package deal Naniwa Chocera Pro whetstones, grit 600 / 2000 / 5000

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Light My Fire FireSteel Bio Army Slaty Black

Skerper Basic sharpening pen with a diamond steel, SO001

Sentry Solutions-Marine Tuf-Cloth

TOPS Knives Leather Bushcraft Pouch Brown SHL-LBP-01

Fallkniven Diamond Ceramic Whetstone DC4

Hultafors Trekking axe H 008 SV, 840066

legal_agecheck_key

Work Sharp Guided Field Sharpener, WSGFS221

TOPS Knives HAT-02 Baseball cap

TOPS Knives HAT-03 Trucker cap

TOPS Knives HAT-01 7-Panel Trucker cap

TOPS Knives Coffee Mug, MUG-01

Handle/blade: micarta/1095-carbon steel
Blade length: 23.9 cm
Weight: 640 grams


The **TOPS Knives Anaconda 9 Hunters Point** is a large survival knife, designed by Ron Hood. This legendary designer is famous for his large outdoor knives. And the Anaconda is a perfect example of this.



Due to its size, the TOPS Knives Anaconda can be used in many different ways. Whether you're gutting game or building a shelter, the Anaconda has your back. With its 6.4 mm thick blade made of 1095 carbon steel, the Anaconda can take a beating. This type of steel is already extremely resistant to knocks and shocks, but this becomes all the more apparent at a thickness of 6.4 mm. On the spine of the blade you'll find a number of serrations towards the tip. These are great for notchingwood or cutting steel wire. Making notches comes in very handy when you're tying paracord to a standing post, for instance - a small notch helps to keep the paracord from just sliding down the post.



For the handle, TOPS has opted for reliable micarta. This is a composite material made from linen and synthetic resin. It's strong and feels good in hand, even when it's wet.



The TOPS Anaconda comes in a sturdy, MOLLE-compatible sheath with two pockets on the front. Handy for a firesteel and a sharpening stone, for example.




TOPS Knives Anaconda 9 Hunters Point AN9HP survival knife, Ron Hood design

brand

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

msrp_price

strike_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

TOPS Knives Anaconda 9 Hunters Point AN9HP survival knife, Ron Hood design

TOPS Knives Anaconda 9 Hunters Point AN9HP survival knife, Ron Hood design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

TOPS Knives Anaconda 9 Hunters Point AN9HP survival knife, Ron Hood design

TOPS Knives Anaconda 9 Hunters Point AN9HP survival knife, Ron Hood design

TOPS Knives Anaconda 9 Hunters Point AN9HP survival knife, Ron Hood design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

TOPS Knives Anaconda 9 Hunters Point AN9HP survival knife, Ron Hood design

Relevant topics