Name: Spyderco utility knife K04SBK, 16.5 cm
Brand: Spyderco
SKU: SPK04SBKS
Price: 475 DKK
Availability: BackOrder

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Skerper Basic sharpening pen with a diamond steel, SO001

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Flitz knife maintenance set, 4-piece

Eden EQP001 Wooden Cutting Board

Eden Magnetic knife strip Walnut, 50 x 6 cm

Spyderco Ceramic Benchstones, medium

Spyderco- Bench Stone Fine

Spyderco- BenchStone Ultra Fine

Utility knife;
Blade length: 16.5 cm
Handle: polypropylene

This **Spyderco K04SBK utility knife** has a serrated, single-edge grind blade. As a result the knife is perfect to, for instance, cut tomatoes, sandwiches, lettuce and much more. The plastic handle has a nice pattern and a practical thumb stud, for optimal grip.

 ## The SpyderEdge: for a life of cutting pleasure.

 To make sure that this knife retains its sharpness well it has been enhanced with the famous SpyderEdge. The edge has serrations in two different sizes. Because the broad serrations don't wear out as fast as the narrower, pointier serrations, the knife doesn't have to be sharpened as often. A unique quality any Spyderco enthusiast will immediately recognize.

 ## The handle is comprised of polypropylene

  - an extremely sustainable type of plastic - which is directly cast around the tang of the blade. Due to the lack of space between the handle material and the steel bacteria cannot settle in the knife. Incredibly hygienic!

 The main advantage of the handle, however, can be found in the ergonomics. The texture will give you the perfect grip. This, in combination with a pleasant thumb stud and rounded pommel (the end of the handle you put your linger finger against) will ensure that your hand won't slip.



Spyderco utility knife K04SBK, 16.5 cm

colour

Spyderco K04SBL utility knife 16.5 cm, blue serrated

blade_finish

blade_feature

kitchen_steel

handle_material

knife_edge_type

sharpening_type

sharpening_angle

delivered_as_a_set

kitchen_knife_type

value_number_of_knives

value_weight

value_blade_height

value_blade_length

value_overall_length

value_blade_thickness

brand

series

expectedRestockDate

legal_agecheck_key

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

Spyderco utility knife K04SBK, 16.5 cm

Spyderco utility knife K04SBK, 16.5 cm

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Spyderco utility knife K04SBK, 16.5 cm

Spyderco utility knife K04SBK, 16.5 cm

Spyderco utility knife K04SBK, 16.5 cm

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Spyderco utility knife K04SBK, 16.5 cm

Relevant topics