Name: SENCUT Errant S23054B-1 Black G10, pocket knife
Brand: SENCUT
SKU: SES23054B-1
Price: 340 DKK
Availability: InStock

The **SENCUT Errant** is a simple EDC pocket knife. The knife is designed for a wide variety of cutting tasks - in short, a true all-round EDC knife. 

## SENCUT Errant blade

You can easily open the pocket knife with the flipper or thumb stud. The blade is made from 9Cr18MoV, a stainless type of steel that is easy to sharpen. The droppoint blade with hollow grind makes this knife suitable for a large range of tasks. The drop point allows you to put some pressure on the tip, without having to worry too much about breakage. The hollow grind allows the blade to cut through harder materials with less resistance.

## SENCUT Errant handle

The handle is made from black G10, a strong composite material made from glass fibres and synthetic resin. When opened, the flipper ensures your fingers will be safe during use.

SENCUT Errant S23054B-1 Black G10, pocket knife

colour

SENCUT Errant S23054B-2 OD Green G10, pocket knife

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

SENCUT Errant S23054B-3 Black Micarta, pocket knife

brand

zm_series

legal_agecheck_key

notforsale

not_replaced_in

expectedRestockDate

videos

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

SENCUT Errant S23054B-1 Black G10, pocket knife