Name: Robert Herder 1922 paring knife 10.4 cm, Plum wood
Brand: Robert Herder
SKU: RH921814984000402
Price: 1147 DKK
Availability: OutOfStock

Robert Herder magnetic knife rack, cherry wood

notforsale

not_replaced_in

Robert Herder maintenance set 920000500

Robert Herder Windmill knife carbon steel, 4 piece set

legal_agecheck_key

Robert Herder maintenance oil for wooden handles, 20 ml

Opinel pocket knife No. 10, stainless steel, 10 cm

productlabel

Robert Herder Buckels set of 6 breakfast knives, in 6 woods

Eden chopping board Iroko wood EQP006-3727

Robert Herder peeling knife

Robert Herder Windmill Knife stainless steel

Robert Herder 120122503 vegetable peeler

Blade length: 10 cm
Total length: 20 cm
Weight: 62 grams

The **Robert Herder K1922 paring knife** is a small and light knife for precise cutting tasks. Because of the compact size the knife feels great in hand. While a chef's knife might be a little too big this paring knife will definitely come in handy.

 To produce a thin knife you need, in addition to craftsmanship, a strong type of steel. This is the reason that (non-stainless) carbon steel is used instead of weaker stainless steel. However, this carbon steel is not stainless and needs some attention. It needs to be cleaned immediately after use. Perhaps even more important is the direct drying of the knife. The knife is absolutely not dishwasher safe! Rinse it off and dry it after use and you will enjoy these knives your whole life.

 The ergonomics are also great. The handle with rounded shapes is slim and graceful and fits perfectly in hand. This knife comes with a bottle of maintenance oil for the wooden handle.

 Most of Robert Herder's knives are made by hand and can therefore have a somewhat longer delivery time. This also means that the delivery time can sometimes differ from what is indicated on our website. If it is indicated that a knife is in stock we actually have it in stock!



Robert Herder 1922 paring knife 10.4 cm, Plum wood

brand

colour

series

blade_finish

blade_feature

kitchen_steel

handle_material

knife_edge_type

sharpening_type

sharpening_angle

delivered_as_a_set

kitchen_knife_type

value_number_of_knives

value_weight

value_blade_height

value_blade_length

value_overall_length

value_blade_thickness

expectedRestockDate

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

Robert Herder 1922 paring knife 10.4 cm, Plum wood

Robert Herder 1922 paring knife 10.4 cm, Plum wood

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Robert Herder 1922 paring knife 10.4 cm, Plum wood

Robert Herder 1922 paring knife 10.4 cm, Plum wood

Robert Herder 1922 paring knife 10.4 cm, Plum wood

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Robert Herder 1922 paring knife 10.4 cm, Plum wood

Relevant topics