Name: Nordic Knife Design Korpi 90 Curly-birch, 2040 fixed knife
Brand: Nordic Knife Design
SKU: NKD2040
Price: 963 DKK
Availability: InStock

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Skerper Basic sharpening set 180/600/1000/3000 with diamond sharpening steel, SH006

Skerper Paddle Strop STP001, stropping paddle

Fiskars X11 light splitting maul

legal_agecheck_key

Fiskars Norden N10 hand axe

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

Fallkniven Diamond Ceramic Whetstone DC4

The **Nordic Knife Design Korpi 90 Curly Birch** is a traditional Scandinavian fixed knife, based on the old, well-known Puukko design. Puukkos are known for having a very slim blade and a fairly simple handle. There is also no finger groove, which gives you more precise control over the blade. 

The blade is made from Sandvik 14C28N steel. This is a Swedish stainless steel that is easy to sharpen. It also has excellent sharpness retention. The blade has a Scandi grind. This means the blade is slightly thicker and the edge is even easier to sharpen. 

The handle is made from stunning birchwood. This is a natural product, making each knife unique. The full-tang blade runs throughout the handle This makes it feel really sturdy. The handle is attached to the blade with two brass rivets. 

The Korpi 90 Curly Birch comes with an authentic leather belt sheath, so you can easily carry the knife on your belt. (Max. belt width 5.5 cm) 

## Nordic Knife Design: proven Scandinavian design

Nordic Knife Design, or NKD for short, is a knife brand from Finland, founded by Dennis Holmbacka. They are known for their full-tang Scandinavian knives. They use beautiful materials for the handles and well-known steels for the blades.

Nordic Knife Design Korpi 90 Curly-birch, 2040 fixed knife

brand

colour

handedness

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

value_max_belt_width

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Nordic Knife Design Korpi 90 Curly-birch, 2040 fixed knife

Nordic Knife Design Korpi 90 Curly-birch, 2040 fixed knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Nordic Knife Design Korpi 90 Curly-birch, 2040 fixed knife

Nordic Knife Design Korpi 90 Curly-birch, 2040 fixed knife

Nordic Knife Design Korpi 90 Curly-birch, 2040 fixed knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Nordic Knife Design Korpi 90 Curly-birch, 2040 fixed knife

Relevant topics