Name: Nordic Knife Design Forester 100 CB 5001, Black Stainless Sandvik 12C27, Curly Birch, Brass Hardware, fixed knife, DIY kit
Brand: Nordic Knife Design
SKU: NKD5001
Price: 379.99 DKK
Availability: InStock

Hultafors Flint FS fire steel, 380280

not_replaced_in

notforsale

Knives and Tools Knife Cleaning Mat, rubber

Work Sharp Ken Onion Edition Knife & Tool Sharpener Mk.2 WSKTS-KO2, electric knife sharpener

Work Sharp WSKTS2 Knife & Tool Sharpener MK2

Skerper Pocket Strop STP002, stropping paddle

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

Skerper Basic sharpening pen with a diamond steel, SO001

Knivesandtools #MatchPatch, #02 Burnt Orange, Limited Edition, patch

Fallkniven Diamond Ceramic Whetstone DC4

Ballistol maintenance oil, 50 ml

Knivesandtools #EveryDayCloth, micro-fibre cloth

Knivesandtools Polishing Cloth, microfibre cloth, 40 cm x  40 cm

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Knivesandtools Logo Pin

Knivesandtools Skull Patch, Padraig Croke design

Ballistol maintenance oil spray, 200 ml

Knivesandtools Sticker Set #02, Padraig Croke design

Knivesandtools #OneKnifeStand, knife stand

Abel

Cinzel

Cormorant Garamond

DM Serif Display

Dancing Script

Lato

Tangerine

Left

Right

Nordic Knife Design Forester 100 CB 5001, Black Stainless Sandvik 12C27, Curly Birch, Brass Hardware, fixed knife, DIY kit

blade_finish

value_blade_length

legal_agecheck_key

knife_edge_type

value_blade_thickness

value_weight

brand

handedness

knife_bladeshape

expectedRestockDate

sharpening_angle

value_blade_height

knife_sheath

colour

value_length

sharpening_type

handle_material

pocketknife_steel

msrp_price

strike_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Nordic Knife Design Forester 100 CB 5001, Black Stainless Sandvik 12C27, Curly Birch, Brass Hardware, fixed knife, DIY kit

Nordic Knife Design Forester 100 CB 5001, Black Stainless Sandvik 12C27, Curly Birch, Brass Hardware, fixed knife, DIY kit

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Nordic Knife Design Forester 100 CB 5001, Black Stainless Sandvik 12C27, Curly Birch, Brass Hardware, fixed knife, DIY kit

Nordic Knife Design Forester 100 CB 5001, Black Stainless Sandvik 12C27, Curly Birch, Brass Hardware, fixed knife, DIY kit

Nordic Knife Design Forester 100 CB 5001, Black Stainless Sandvik 12C27, Curly Birch, Brass Hardware, fixed knife, DIY kit

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Nordic Knife Design Forester 100 CB 5001, Black Stainless Sandvik 12C27, Curly Birch, Brass Hardware, fixed knife, DIY kit

Relevant topics