Name: NOC Knives Dragon Ball MT-3501 Satin M390, Grey Titanium, pocket knife
Brand: NOC Knives
SKU: NKMT3501
Price: 3260 DKK
Availability: InStock

The **NOC Knives Dragon Ball MT-3501** is a robust yet elegant pocket knife that's quite large. The elegance is reflected in the perfect finish and attention to detail. Gorgeous oversized thumb studs, stunning standoffs on the show side of the knife and as icing on the cake, a giant stylised hinge screw. Another nice detail is that the backspacer serves as a stop pin. As a result, the lock-up is incredibly strong, and the design comes together nicely. The finishing is very meticulous, and you can feel and see that immediately. The NOC Knives MT-3501 Dragon Ball is a work of art. In short, if you are looking for a sturdy flagship knife with character, this is the knife for you. It comes in a nice plastic storage box.

Abel

Cinzel

Cormorant Garamond

DM Serif Display

Dancing Script

Lato

Tangerine

Left

Right

NOC Knives Dragon Ball MT-3501 Satin M390, Grey Titanium, pocket knife

brand

notforsale

knife_sheath

value_weight

legal_agecheck_key

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

value_multitool_tools_number

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

not_replaced_in

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

NOC Knives Dragon Ball MT-3501 Satin M390, Grey Titanium, pocket knife

NOC Knives Dragon Ball MT-3501 Satin M390, Grey Titanium, pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

NOC Knives Dragon Ball MT-3501 Satin M390, Grey Titanium, pocket knife

NOC Knives Dragon Ball MT-3501 Satin M390, Grey Titanium, pocket knife

NOC Knives Dragon Ball MT-3501 Satin M390, Grey Titanium, pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

NOC Knives Dragon Ball MT-3501 Satin M390, Grey Titanium, pocket knife

Relevant topics