Name: Naniwa Nagura stone, grain 400
Brand: Naniwa
SKU: NANA400
Price: 110.2 DKK
Availability: InStock
Rating: 10 (3 reviews)

Coarse Nagura stone to create a slurry on a sharpening stone

The **Naniwa Nagura grain 4000** is a coarse synthetic Nagura stone which will help you create a slurry on a sharpening stone. This Nagura is perfect for sharpening stones of 4000 grit or lower. 


## Naniwa Nagura's


A Nagura is an optional small stone that creates a slurry on a sharpening stone. These synthetic Naniwa Nagura's are made from the same material as most artificial sharpening stones: Aluminium oxide. In the past Nagura's were mostly used on sharpening stones with high grain sizes. These stones are often a lot harder and have more difficulty creating their own slurry. A Nagura creates its own sharpening particles and also ensures that the sharpening particles are more easily released. A Nagura also works when applying a finer finish on a coarse sharpening stone.


 In addition to creating a slurry the Nagura is also perfect for use after sharpening. Nagura's are namely also great when cleaning the sharpening stone. During and after use metal particles from the knife end up in the stone. As you are sharpening your knife you want to immediately remove these, especially in the higher grits these metal particles can leave unwanted scratches. The Nagura removes these metal particles from the stone to make sure you use it again. It is also practical to clean the stone after use. The metal particles that stay behind in the sharpening stone have a tendency to rust.


## Use


Sprinkle water on the Naniwa Nagura or briefly submerge it in water. These Nagura's are Splash&Go which means you don't have to hold them under water for a long period of time. Add water to your sharpening stone and rub the Nagura over the surface of the sharpening stone until the slurry has emerged.


## Which Nagura do I need?


 Nagura's are very useful in polishing as you sharpen your knife. The rule of thumb is: Choose a Nagura with the same or higher grit than the sharpening stone you wish to use.


### Nagura with the same grain size as the sharpening stone


A Nagura with the same grain size is more efficient as you use it and it will keep your sharpening stone clean. 


### Nagura finer than the sharpening stone


A Nagura that is finer than the sharpening stone you want to use leaves you with a mixed slurry of the fine sharpening particles of the Nagura and the coarser sharpening particles of the sharpening stone. With it you improve the polishing effect of the sharpening stone. 


### Nagura coarser than the sharpening stone


A Nagura that is coarser than the sharpening stone you want to use leaves you with a coarser slurry than that of the sharpening stone. It will remove material quicker, but if that is your goal we would rather recommend a coarse sharpening stone!


A Nagura is not a flattening stone! It extends the moment you need to flatten the sharpening stone, but it won't replace a flattening stone when your sharpening stone needs one. Nagura's can be used on all whetstones. 



Naniwa Nagura stone, grain 400

grit_size_kato

Naniwa Nagura stone, grain 1000

colour

grit_general

stone_abrasive

value_width

value_height

value_length

value_weight

Naniwa Nagura stone, grain 3000

Naniwa Nagura stone, grain 8000

brand

notforsale

not_replaced_in

expectedRestockDate

msrp_price

valueForMoneyStars

meetsExpectationsStars

authorCity

Un produs foarte bun , păcat că se consumă repede .

Très bien, efficace même sur les autres marques que Naniwa

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

value_height_usable_part

The height/thickness of a sharpening stone (excluding a potential base).

Height usable part

value_length_useful_part

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

value_width_useful_part

Dimensions & weight

The material that gives the sharpening stone its abrasive effect. Diamond, ceramics (e.g. aluminium oxide or silicon carbide) or the materials in a natural stone. Read [more about the advantages and disadvantages of these materials](/en/ct/sharpening-stone-materials-which-are-the-best.htm).

Abrasive

Material

The grain size a supplier gives to its sharpening stones. Please note: This can be either in FEPA-F (European), ANSI (American) or JIS (Japanese). Read [more about the different grain sizes here](/en/ct/expressing-grain-sizes-sharpening-stones.htm).

Grit according to supplier

stone_acc_type

stone_water

Some sharpening stones need to be submerged, others only need a splash of water and some need no water at all! For the best results, check in advance what is best for your sharpening stone.

Use with water

The grain size we give to a sharpening stone. We test all sharpening stones ourselves and add an appropriate grain size on the basis of this test. From extra coarse to ultra fine.

Naniwa Nagura stone, grain 400