Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Skerper Pocket Strop STP002, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Maintenance Oil Pen MA002, 10 ml

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Shapton Glass Stone Seven sharpening set, 70708

KME Precision Knife Sharpening System, R.P.S.H. Combo Kit, KF-CBO

Fox Bean Gen 2 Full Black BF-719G10 Black Fox pocket knife, Serge Panchenko design

legal_agecheck_key

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

Fox Knives Racli BF-744ZW Black Fox, Zebra wood pocket knife, Simonutti design

Work Sharp Angle Set knife sharpener, WSBCHAGS

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Lansky Pocket Ceramic Sharpening System

Fenix E28R rechargeable EDC flashlight

Nano-Oil 10w maintenance oil 8cc/8ml

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

Handle/blade: nylon/1.4116
Blade length: 2.5 cm
Weight: 35 grams

The **Fox Mini-TA** is a tiny keychain pocket knife. It is a daring concept to introduce such an iconic knife in such a size. And yet Fox Knives knows what it is doing because it simply works! Especially when opening boxes the Mini-Ta is the perfect companion. This model is based on the Mini-Ka. This was a real karambit knife, the Mini-Ta has a straight blade.

 Sometimes you see that a manufacturer uses a slightly lesser quality steel for a keychain knife. Fox, however, didn't do such thing. They used 1.4116 steel. A stainless German type of steel that is tough and easy to sharpen. You open it with two hands, or with a little practice you can use the front flipper technique. For it you use the latch at the top of the blade. By placing your thumb against it you can open the blade.

 This mini knife is even enhanced with a lock. You can carry it on your bunch of keys by using the lanyard eye. You can also use the large finger hole for that. Prefer the classic style? You can also use the pocket clip.



Fox Knives Mini-Ta Pink Blasted

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Fox Knives Mini-Ta Pink Blasted

Fox Knives Mini-Ta Pink Blasted

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Recommended combi-deals

Fox Knives Mini-Ta Pink Blasted

Fox Knives Mini-Ta Pink Blasted

Fox Knives Mini-Ta Pink Blasted

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Recommended combi-deals

Fox Knives Mini-Ta Pink Blasted

Relevant topics