Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Skerper Pocket Strop STP002, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Maintenance Oil Pen MA002, 10 ml

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Shapton Glass Stone Seven sharpening set, 70708

KME Precision Knife Sharpening System, R.P.S.H. Combo Kit, KF-CBO

Fox Bean Gen 2 Full Black BF-719G10 Black Fox pocket knife, Serge Panchenko design

legal_agecheck_key

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

Fox Knives Racli BF-744ZW Black Fox, Zebra wood pocket knife, Simonutti design

Work Sharp Angle Set knife sharpener, WSBCHAGS

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Lansky Pocket Ceramic Sharpening System

Fenix E28R rechargeable EDC flashlight

Nano-Oil 10w maintenance oil 8cc/8ml

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

Handle/blade: carbon fibre and titanium/Böhler N690Co
Blade length: 6.4 cm
Weight: 85 grams

The **Fox Karambit Titanium Framelock FX-599TiCS** is a very luxurious karambit knife. This knife is made from great materials and has an excellent finish. A karambit that is almost too beautiful to use, but is definitely made to be used.


Fox really indulged itself when it comes to the technical side of the frame. Part titanium, part carbon. The back of the lock side and the lockbar are made from titanium, the rest of the handle is made from carbon fibre. A special type of hybrid. Stunning.



The blade is made from Böhler N690Co steel. An Austrian type of steel known for retaining its sharpness well. N690Co is also corrosion resistant.



You can open the karambit in three different ways. With the thumb hole, the flipper or the wave opener. The wave opener is the fastest way to open this knife. Because the hook on the spine of the blade gets caught behind the edge of your pocket and the knife will open on its own. It doesn't get any faster than this. This feature was invented by Ernest Emerson.



 The karambit has its origins in south east Asia. Here it evolved from being an agricultural knife to a combat knife for one on one fights. You use a karambit by putting your index finger through the ring so that the blade is located at the bottom of your fist.


With the Fox Karambit Titanium Framelock FX-599TiCS you introduce your home to an absolutely amazing tool.




Fox Karambit Titanium Framelock Bead Blasted FX-599TiCS, karambit knife

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Fox Karambit Titanium Framelock Bead Blasted FX-599TiCS, karambit knife

Fox Karambit Titanium Framelock Bead Blasted FX-599TiCS, karambit knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Fox Karambit Titanium Framelock Bead Blasted FX-599TiCS, karambit knife

Fox Karambit Titanium Framelock Bead Blasted FX-599TiCS, karambit knife

Fox Karambit Titanium Framelock Bead Blasted FX-599TiCS, karambit knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Recommended combi-deals

Fox Karambit Titanium Framelock Bead Blasted FX-599TiCS, karambit knife

Relevant topics