Name: CRKT M16, Spear Point, Bead Blasted M16-01S pocket knife
Brand: CRKT
SKU: CK-M16-01S
Price: 447 DKK
Availability: InStock

Knivesandtools #EveryDayCloth, micro-fibre cloth

notforsale

not_replaced_in

Skerper Pocket Strop STP002, stropping paddle

Skerper Maintenance Oil Pen MA002, 10 ml

Work Sharp Angle Set knife sharpener, WSBCHAGS

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

productlabel

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Work Sharp Micro knife sharpener and 3-piece bit set, WSEDCMCR

CRKT Knife Maintenance Tool 9704, Tom Stokes design

CRKT Hex Bit Driver Tool Roll 9911 screwdriver set

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

CRKT Squid pocket knife stonewash-2490

legal_agecheck_key

CRKT Hex Bit Driver, Brass, 9911-2, Scout Tools design

Work Sharp Guided Field Sharpener, WSGFS221

CRKT 9110C, Eat'N Tool XL, bead blast

Fallkniven Diamond Ceramic Whetstone DC4

CRKT 9100KC, Eat'N Tool, Black

The **CRKT M16** is probably the most iconic CRKT model ever designed. This knife, which was designed by Kit Carson, is an homage to the M16 assault rifle, and has been around for quite some time. This M16-01S features a spearpoint. You can open it with one hand by using the thumb stud. A liner lock then locks the blade in place. Because the flipper serves as a support for your finger when opened, slipping and ending up on the blade is almost impossible.

The M16 knife has an InterFrame construction with strong nylon scales that are enforced with glass fibre. The result is an incredibly strong handle that feels great in hand. Perfect for everyday use.

You can easily open the knife with the help of the Carson Flipper. This flipper also protects your fingers after opening the blade. The CRKT M16-01S has a practical pocket clip, so you can easily carry it with you every day.


CRKT M16, Spear Point, Bead Blasted M16-01S pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

CRKT M16, Spear Point, Bead Blasted M16-01S pocket knife

CRKT M16, Spear Point, Bead Blasted M16-01S pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Recommended combi-deals

CRKT M16, Spear Point, Bead Blasted M16-01S pocket knife

CRKT M16, Spear Point, Bead Blasted M16-01S pocket knife

CRKT M16, Spear Point, Bead Blasted M16-01S pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Recommended combi-deals

CRKT M16, Spear Point, Bead Blasted M16-01S pocket knife

Relevant topics