Name: Buck 590BRS Paradigm Brown G10 pocket knife
Brand: Buck
SKU: BUCK590BRS
Price: 1572 DKK
Availability: InStock

Ballistol maintenance oil, 50 ml

notforsale

not_replaced_in

productlabel

Knivesandtools #EveryDayCloth, micro-fibre cloth

Skerper Pocket Strop STP002, stropping paddle

Knivesandtools #OneKnifeStand, knife stand

Skerper Maintenance Oil Pen MA002, 10 ml

Fallkniven Diamond Ceramic Whetstone DC4

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Schmuckatelli Buck Knives Anvil Bead Pewter

Buck Deuce 0375BRS pocket knife

legal_agecheck_key

Buck Waffle Knit Beanie 89170 Blaze Orange, beanie

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Work Sharp Angle Set knife sharpener, WSBCHAGS

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Work Sharp Multi-Sharpener Ken Onion Edition

Handle/blade: G10/CPM S35VN
Blade length: 7.6 cm 
Weight: 135 grams

The **Buck 590 Paradigm** is a cool EDC pocket knife with assisted opening. This means that when opening the knife you are assisted by a strong spring. As such it opens quickly!



When opened the blade is locked by a so-called 'Bolster Lock'. A lock you don't see on the knife. And yet, it's there! You namely unlock it by slightly moving the bolster. That is when you can fold the blade back. A remarkable lock that prevents accidental closing. We do have to be frank here and say that because of this special lock it is better suited for right-handed use. Sorry lefties!



The blade is made from premium CPM S35VN steel. An American type of powder steel that retains its sharpness well, is stainless and also easy to sharpen. Due to the heat treatment according to the recipe of the legendary Paul Bos this steel is even better than the steel of some other products. The handle is made from G10.




Buck 590BRS Paradigm Brown G10 pocket knife

colour

Buck 590BKS Paradigm Black G10 pocket knife

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

brand

zm_series

expectedRestockDate

strike_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Buck 590BRS Paradigm Brown G10 pocket knife

Buck 590BRS Paradigm Brown G10 pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Buck 590BRS Paradigm Brown G10 pocket knife

Buck 590BRS Paradigm Brown G10 pocket knife

Buck 590BRS Paradigm Brown G10 pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Buck 590BRS Paradigm Brown G10 pocket knife

Relevant topics