Name: Benchmade Bushcrafter 163-1, CPM-S30V, OD Green G10, bushcraft knife, Sibert design
Brand: Benchmade
SKU: BE163-1
Price: 2907 DKK
Availability: InStock

The **Benchmade Bushcrafter 163-1** is, as the name already suggests, a fixed knife made for bushcraft purposes. That's why the knife has a sturdy blade and a handle with plenty of grip. The Bushcrafter is made in Oregon, USA, and designed by Shane Sibert Knives. The knife comes with a leather sheath that has room for a firesteel.

## Benchmade Bushcrafter blade

The S30V powder steel blade runs throughout the entire handle (full-tang) and is rock-solid. This knife is great for the more demanding tasks. Still, the grind of the knife makes it suitable for delicate cutting work too, like food prep or woodcarving.

## Benchmade Bushcrafter handle

The handle is made from G10 and enhanced with a remarkable profile that feels incredibly comfortable in hand. The handle is relatively thick, but still light and comfortable to use. The thickness simply ensures the knife is also nice to use while wearing gloves. The G10 scales are attached to the blade with pressed titanium rings. A remarkable and effective construction that also enables you to attach the knife to something. For instance, to turn your knife into a spear.

Benchmade Bushcrafter 163-1, CPM-S30V, OD Green G10, bushcraft knife, Sibert design

value_blade_length

Benchmade Mini Bushcrafter 165-1, CPM-S30V, OD Green G10, bushcraft knife, Sibert design

colour

handedness

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_thickness

brand

zm_series

legal_agecheck_key

notforsale

not_replaced_in

expectedRestockDate

videos

msrp_price

strike_price

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

value_max_belt_width

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Benchmade Bushcrafter 163-1, CPM-S30V, OD Green G10, bushcraft knife, Sibert design